Ghawrغَوْر عربي

A basement workshop in Jabal Al-Hussein

Two benches end to end under a window at pavement height, a qanun on a stand, and whatever is on test that day open on the right-hand bench.

A concept by The Office Development: an attempt to imagine a maqam instrument from Amman, how it would look and how it would sound. The workshop, the basement and the three people below are invented for this study. The street is real.

The benches, seen from the door.

Suhail

Levers, cases and finishing

Suhail makes everything you touch. Every lever passes through his lathe and every notch under his file, and he takes the flat panels to a sheet-metal shop in Sahab to be folded, then brings them back to be fitted and finished.

The bench

The left bench is for metal: a drill press, a small lathe for the lever pins, files, and a box of brass bar cut to length. The right one is for everything with a power lead: a soldering station, an oscilloscope and a laptop with the string model open. Beside it stands the qanun that nobody is allowed to borrow, because every instrument is tuned against it.

Yazan

Circuits and the string model

Yazan designs the circuits and writes the string model. He spent years repairing the keyboards that wedding players carry from hall to hall, which is where he learned how much a night of music depends on a quarter tone someone set before the first song, and how hard it is to change in the middle of one.

Dima

Qanun, sound and tuning

Dima plays qanun and decides what the Ghawr sounds like, which in practice means she plucks a course, listens, and asks for the Sikah to sit a little lower. Every instrument in the batch is tuned by her ear against her own qanun before it leaves.

How a batch is made

A batch takes about a month, from flat sheet to twenty-four instruments on the shelf.

  1. Sahab

    The panels are cut and folded in Sahab, anodised green, and come back stacked in a van.

  2. The lathe

    Suhail turns fifteen levers for each instrument, files the notches and seats a magnet in each.

  3. The boards

    Yazan builds and tests the boards, and calibrates every strip against a weight, end to end.

  4. Tuning

    Dima tunes each instrument course by course against her qanun and sets the trim screws by ear.

  5. Two days on

    The finished instruments run for two days with the drone on, which is when the whole workshop hums.

A street in Jabal Al-Hussein lined with apartment buildings, shop signs and parked cars
Jabal Al-Hussein, a few streets from the workshop. Photo: Adeeb Atwan, CC BY 3.0

The street

The workshop would sit in a side street off Khalid Bin Al-Walid Street in Jabal Al-Hussein, a few minutes’ walk from Firas Roundabout. It is a street of clinics, banks and shopfronts, and of basements with windows at pavement height, where repair shops for phones, sewing machines and amplifiers sit a few steps below the traffic.

We chose it for the rent a small team can carry, an electronics trade within walking distance for a missing part, and a sheet-metal shop in Sahab a short drive away.

Credits

Concept, design and code: The Office Development.

Photography

  1. Jordan, Wadi Rum Desert, Infinite Spaces, Vyacheslav Argenberg, CC BY 4.0, Wikimedia Commons
  2. Sandstone-granite rock - Wadi Rum, Jorge Láscar, CC BY 2.0, Wikimedia Commons
  3. Jabal Al Hussein, Amman, Jordan - panoramio (7), Adeeb Atwan, CC BY 3.0, Wikimedia Commons

The instrument, the drawings and the sounds on this site are made in code by the studio. No sound on the site is a recording.

Type

Geologica (The Geologica Project Authors), Scheherazade New (SIL Global) and Beiruti (The Beiruti Project Authors), all under the SIL Open Font License.

Sources

Maqam scales checked against MaqamWorld. Note names are the Arabic names of the 24-step scale as players use them. Facts about the rift from the published geology of the Dead Sea Transform.